Bagi anda para teknisi Elektronik khususnya bagi anda yang bergelut dalam perbaikan TV, mungkin anda tahu bahwa perkembangan elektronika begitu cepat berkembang. Dunia digital sudah mulai merambah di dunia peralatan elektronik sekarang begitupun perkembangan televisi yang dulu masih konvensional sekarang sudah mulai berubah dari tahapan semi digital analog sampai full digitall.
Untuk tahapan digital dalam pengaturan/setting costumize dalam perbaikan TV tentunya sudah berbeda dengan versi TV angkatan sebelumnya yang masih konvensional. Artinya perbaikan dilakukan dengan sisitem digital sekarang. Dunia wireless untuk sistem control mulai di gunakan seperti halnya Remote TV sebagai media control untuk pemijitan tombol-tombol nya. Pengaturan untuk merubah/adjust suatu setingan dalam perbaikan TV sekarang sudah menggunakan sistem kontrol digital dengan menggunakan tombol pijitan sebagai code untuk perubahan adjusment baik untuk pengaturan Tegangan Horizontal, perbesaran gambar, frekwensi besaran vertikal-horizontal, untuk adjusment RGB pada layar, untuk Gain/penguatan sinyal dan lain-lain semuanya menggunakan secret code yang biasanya sudah menjadi bawaan dari pabrik nya dan tentunya tiap-tiap merk TV memmpunyai factory code berbeda-beda.
Saya akan berikan beberapa Factory code untuk berbagai merk TV, mudah2n sangat berguna bagi anda para teknisi TV.
The quote from the manual is: Adjustment method:1) Enter the adjust mode by pressing the IN-START button which seems to suggest its going to need the remote “in-start” button only exists on service remote mate, part number 105-201MLGMC64 CTV Service ModeSimultaneous press OK on RC & local panel.GrundigCUC1800 CTV Child Lock
Cancel
Press VOL+, VOL-, PR-, PR+, OK.
GrundigCUC1800 CTV EPROM
Version Nr.
Press button ‘i’ to call up the ‘Dialog Center’ –>
OK. The version number is shown by pressing
the ‘AUX’ button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version.
GrundigCUC1800 CTV Service Mode
Menu guide: ‘i’, ‘Special functions’, ‘Service’,
‘Code 8500′.
GrundigCUC1805 CTV ATS Reset
Press and hold button VOL+ on the TV and
switch the mains button ON. ATS bit is set.
GrundigCUC1805 CTV Child Lock
Cancel Press VOL+, VOL-, PR-, PR+, OK.
GrundigCUC1805 CTV
Default Values Entering
Depress and hold the button ‘P-’ on the RC while
switching on with the mains button. (This is
only possible once on replacement of the NVM
or uP).
GrundigCUC1805 CTV
EPROM Version Nr.
Press button ‘i’ to call up the ‘Dialog Center’ –>
OK. The version number is shown by pressing
the ‘AUX’ button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version.
GrundigCUC1805 CTV Service Mode
Press ‘i’. Dialog Center –> Service –> ‘for
authorized dealer’ –> Code Number 8500.
GrundigCUC1805 CTV
Volume Offset Cancel
Press and hold the ‘AUX’ button on the RC while
switching the TV on with the mains button.
GrundigCUC1806 CTV
Child Lock Cancel
General reset with number 7038.
GrundigCUC1806 CTV Demo Mode
Demo on: Depress and hold button ‘L+’ on the
TV and switch the TV on with the mains button.
Press the ‘P+’ button within a time of 10s.
Demo off: ATS Reset (by depressing the ‘L+’
button on the TV while switching on with the
mains button).
GrundigCUC1806 CTV EPROM
Version Nr.
Press button ‘i’ to call up the ‘Dialog Center’ –>
OK. The version number is shown by pressing
the ‘AUX’ button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version.
GrundigCUC1806 CTV Factory Default Values Resetting Buttons ‘AUX’, ‘OK’.
GrundigCUC1806 CTV Service Mode Menu guide: ‘i’, ‘Dialog Center’, ‘Service’, ‘Only
for retailer’, ‘Code 8500′.
GrundigCUC1821 CTV Child Lock Cancel Press VOL+, VOL-, PR-, PR+, OK.
Grundig CUC1821 CTV
EPROM Version Nr.
Press button ‘i’ to call up the ‘Dialog Center’ –>
OK. The version number is shown by pressing
the ‘AUX’ button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version.
GrundigCUC1821 CTV Service Mode
Menu guide: ‘i’, ‘Special functions’, ‘Service’,
‘Code 8500′.
GrundigCUC1822 CTV Child Lock Cancel Press VOL+, VOL-, PR-, PR+, OK.
GrundigCUC1822 CTV EPROM Version Nr. Press button ‘i’ to call up the ‘Dialog Center’ –>
OK. The version number is shown by pressing the ‘AUX’ button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version.
GrundigCUC1822 CTV Service Mode Menu guide: ‘i’, ‘Special functions’, ‘Service’,
‘Code 8500′.
GrundigCUC1824 CTV Child Lock Cancel Press VOL+, VOL-, PR-, PR+, OK.
GrundigCUC1824 CTV
EPROM Version Nr.
Press button ‘i’ to call up the ‘Dialog Center’ –>
OK. The version number is shown by pressing
the ‘AUX’ button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version.
GrundigCUC1824 CTV Service Mode
Menu guide: ‘i’, ‘Special functions’, ‘Service’,
‘Code 8500′.
GrundigCUC1825 CTV ATS Reset
Press and hold button VOL+ on the TV and
switch the mains button ON. ATS bit is set.
GrundigCUC1825 CTV
Child Lock Cancel
Press VOL+, VOL-, PR-, PR+, OK.
GrundigCUC1825 CTV
EPROM Version Nr.
Press button ‘i’ to call up the ‘Dialog Center’ –>
OK. The version number is shown by pressing
the ‘AUX’ button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version.
GrundigCUC1825 CTV
ROM Data Loading
Press and hold the P- buton on the TV and
switch on with the mains button. Loading
the Average Values / Emergency Data Set
(ROM Dana). This is only possible once on
replacement of the NVM or uP.
GrundigCUC1825 CTV Service Mode
Menu guide: ‘i’, ‘Dialog Center’, ‘Service’, ‘Only
for retailer’, ‘Code 8500′.
GrundigCUC1825 CTV
Volume Offset Cancel
Press and hold the ‘AUX’ button on the RC while
switching the TV on with the mains button.
GrundigCUC1826 CTV ATS Reset
Press and hold button VOL+ on the TV and
switch the mains button ON. ATS bit is set.
GrundigCUC1826 CTV
Child Lock Cancel
Press VOL+, VOL-, PR-, PR+, OK.
GrundigCUC1826 CTV
EPROM Version Nr.
Press button ‘i’ to call up the ‘Dialog Center’ –>
OK. The version number is shown by pressing
the ‘AUX’ button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version.
GrundigCUC1826 CTV
ROM Data
Loading
Press and hold the P- buton on the TV and
switch on with the mains button. Loading
the Average Values / Emergency Data Set
(ROM Dana). This is only possible once on
replacement of the NVM or uP.
GrundigCUC1826 CTV Service Mode Press ‘i’. Dialog Center –> Service –> ‘for
authorized dealer’ –> Code Number 8500.
GrundigCUC1826 CTV Volume Offset Cancel Press and hold the ‘AUX’ button on the RC while
switching the TV on with the mains button.
GrundigCUC1827 CTV Child Lock Cancel Press VOL+, VOL-, PR-, PR+, OK.
GrundigCUC1827 CTV Default Values Entering Depress and hold the button ‘P-’ on the RC while
switching on with the mains button. (This is only possible once on replacement of the NVM or uP).
GrundigCUC1827 CTV EPROM Version Nr. Press button ‘i’ to call up the ‘Dialog Center’ –>
OK. The version number is shown by pressing the ‘AUX’ button. The index 01 of the part nr.
(19798-300.01) indicates the EPROM version.
GrundigCUC1827 CTV Service Mode Menu guide: ‘i’, ‘Dialog Center’, ‘Service’, ‘Only
for retailer’, ‘Code 8500′.
GrundigCUC1827 CTV Volume Offset Cancel Press and hold the ‘AUX’ button on the RC while
switching the TV on with the mains button.
GrundigCUC1828 CTV Child Lock Cancel General reset with number 7038.
GrundigCUC1828 CTV Demo Mode Demo on: Depress and hold button ‘L+’ on the
TV and switch the TV on with the mains button. Press the ‘P+’ button within a time of 10s.
Demo off: ATS Reset (by depressing the ‘L+’ button on the TV while switching on with the
mains button).
- Turn the TV on.
* Press and hold the {VOL-} button on the TV.
* Press and hold the {9} button on the remote.
* The Service Menu will be displayed. * Use the {CH+} or {CH-} buttons to select the item.
* Use the {VOL+} and {VOL -} buttons to adjust the value.
* Turn the set off to exit the Service Menu.
LCDs :
* Press the {MENU} button on the
remote.
* Highlight the “Picture” icon.
* Press the {9} {3} {0} {1} buttons
on the
remote control.
* The Service Menu will be displayed
with the following Modes:
“Options” – “Adjustments” – “Selections”
* Use the {OK} button to access and
navigate through these Modes.
* To change values use {VOL +} {VOL-) {P+} {P-}
* To exit, press the {MENU} button.
- Turn TV off
- Press: MUTE 1 8 2 POWER
- TV will power up in service mode and GAMMA GAIN1 will be displayed onthe screenUse VOL+ and VOL – to select an item Use MUTE and the MENU to adjust
Use ADD to save the settings
- CHASSIS: SCT51ATurn TV offPress SLEEP P.STD MUTE
- CHASSIS: SCT11A, SCT11B, SCV11A, SCV11BPress P.STD MENU SLEEP POWER ONPerform adjustments with VOL + and VOL -Select between adjustments with CH + and CH -
- Turn on the TV on and select the input that you want to adjust.Turn the display off.In quick sequence on the remote press:{MUTE} {1} {8} {2} {POWER} buttons. The TV will turn On with the Service Menu displayed.
ADJUSTMENT – TEST PATTERN – SET OPTION BYTE – FACTORY RESET
Select the function and use the {VOL+} button to enter.
Save settings and exit by pushing {MUTE} twice then {POWER}.
- With the TV in standby, press the {INFO} {MENU} {MUTE} {POWER} buttons on the remote.- The TV will turn On with the Service Menu displayed.- Press the {POWER} button to exit the Service Menu.
With the TV in standby, press the{DISPLAY} {P.STD} {MUTE} {POWER} on the remote.* The TV will turn On with the Service Menu displayed.* Use the {CH+} {CH -} buttons to select items. * Use the {VOL+} {VOL -} buttons to adjust.
* Press the {POWER} button to exit the Service MenuTCL
PUSH DISPLAY (OSD) ON REMOTE + VOLUME DOWN DI TV ,HOLD 3 second
CRYSTAL
POSISI TV STNDBY,TEKAN VOLUME UP + VOLIME DOWN PADA TV BERSAMAAN DAN TAHAN HINGGA TV ON
.
AKARITEKAN SLEEP DI REMOTE + MENU TV
Postingan
